background image

 

Maintenance

 

45 

 

Pos: 29.1 /Überschriften/Überschriften 1/U-Z/Wartung @ 0\mod_1199883581050_78.docx @ 36685 @ 1 @ 1 

 

10 

Maintenance  

Pos: 29.2 /Überschriften/Überschriften 2/P-T/SSpeziell e Sicherheitshinweise @ 0\mod_1196660495760_78.docx @ 9134 @ 2 @ 1 

 

10.1 

 Special Safety Instructions 

Pos: 29.3 /BA/Sicher heit/6. Ü ber arbeitete War nhi nweise/Warnung - Reparatur-,Wartungs- und Rei nigungsarbeiten @ 299\mod_1412929917833_78.docx @ 2341058 @  @ 1 

 

 

WARNING! 
When performing repair, maintenance or cleaning work on the machine, or in case of 
technical intervention, drive elements may start moving and thus there is a risk of 
injuries or death. 

•  Switch off tractor engine, remove the ignition key and carry it with you. 
•  Secure the tractor against accidental start-up and against rolling. 
•  Wait until all machine parts have come to a complete stop and have been cooled down 

completely. 

•  Perform work on the disc mower only if it is in the working position. 

 

Pos: 29.4 /BA/Sicher heit/7. Gefahrenhi nweise alt/Mähwer ke/Gefahr - Bei  unregel mäßiger Kontr olle der Messer kli ngen und H altebolzen @ 0\mod_1196782406281_78.docx @ 14870 @  @ 1 

 

 

Danger! - When checking the cutter blades and retaining bolts only sporadically 

Effect: Danger to life, injuries or damage to the machine. 
•  Always check the mowing units for damaged, missing or worn blades, retaining bolts, leaf 

springs and cutting discs/blade drum before starting operation; replace any parts that are 

damaged, missing or worn! 

•  Always replace missing and damaged blades in sets to prevent unbalanced rotation! 
•  Never mount unevenly worn blades on a drum/disc! 
•  Whenever a blade is changed, also inspect the fasteners and replace them, if necessary! 

 

Pos: 29.5 /Überschriften/Überschriften 3/P-T/PPr obel auf @ 0\mod_1196833698843_78.docx @ 15023 @ 3 @ 1 

 

10.1.1 

Test run  

Pos: 29.6 /BA/Sicher heit/7. Gefahrenhi nweise alt/Mähwer ke/Gefahr - Probel auf Einzahl Mähwer k muss auf Boden auflieg en @ 11\mod_1223615241207_78.docx @ 148217 @  @ 1 

 

 

Danger! - Testing the machine after repair, maintenance or cleaning work and after 
technical intervention. 

Effect: Danger to life or serious injuries 
•  The mowing unit must be in working position 
•  Do not switch on the drives until the mowing unit is resting on the ground and you are 

absolutely sure that neither persons, animals nor objects are in the danger zone. 

•  Start a trial run of the machine only from the driver’s seat. 

 

Pos: 29.7 /Überschriften/Überschriften 2/A-E/EErsatzteile @ 0\mod_1196782991234_78.docx @ 14927 @ 2 @ 1 

 

10.2 

Spare Parts  

Pos: 29.8 /BA/Sicher heit/7. Gefahrenhi nweise alt/Mähwer ke/WARNUNG - Ver wendung von nicht zug elassenen Ersatzteilen @ 308\mod_1417011577394_78.docx @ 2392925 @  @ 1 

 

 

Warning! - Using non-approved spare parts. 

Effect: Danger to life, serious injuries or loss of warranty claims as well as exclusion of liability 
•  Use only authentic KRONE spare parts and accessories authorised by the manufacturer. 

The use of spare parts, accessories or additional equipment not manufactured, tested or 

approved by KRONE will exclude any liability for consequential damage. 

 

Pos: 29.9 /Layout M odul e /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание AM 203 S











































































Отзывы: