Krone AM 203 S Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 74

background image

Settings

42

Pos: 27.7 /Überschriften/Überschriften 2/A-E/E/Entl astungsfeder n einstell en @ 387\mod_1445259926661_78.docx @ 2774908 @ 2 @ 1

9.2

Setting the Relief Springs

Pos: 27.8 /BA/Sicher heit/7. Gefahrenhi nweise alt/Mähwer ke/Gefahr - Einstell ung an den Entlastungsfedern @ 0\mod_1196751594562_78.docx @ 12575 @ @ 1

Danger! - Setting on the compensation springs

Effect: Danger to life or serious injuries
• The compensation springs must only be removed in transport position. In the working

position the compensation springs are subject to high tensile stress.

• Severe injury can be caused if the compensation springs are removed while in the working

position.

• The lower threaded blocks on the compensation springs must be fully screwed in.

Pos: 27.9 /BA/Einstell ung en/Mähwer ke/EasyC ut/Bodendruck/Bodendruck allgemeiner T ext all e EC @ 0\mod_1196667271181_78.docx @ 10190 @ @ 1

The ground pressure for the cutter bar is adjusted to local conditions by means of the

compensation springs. In order to protect the sward the load on the mowing spar must be

relieved so that it does not jump when mowing, yet does not leave any skid marks on the

ground.

Pos: 27.10 /BA/Ei nstellungen/M ähwer ke/M ähwer ke AM Baur eihe/Einstell en der Entlastungsfeder(n) Bild AM-S Baur eihe @ 69\mod_1305107338880_78.docx @ 634201 @ @ 1

AMS-0-051

Fig. 19

Pos: 27.11 /BA/Ei nstellungen/M ähwer ke/M ähwer ke AM Baur eihe/Hi nweis Die Federn ( 2) und (3) entl asten den Mähhol m an der Außens eite. @ 73\mod_1308228901018_78.docx @ 655316 @ @ 1

Note

Springs (2) and (3) relieve the cutter bar on the outside.

Pos: 27.12 /BA/Ei nstellungen/M ähwer ke/M ähwer ke AM Baur eihe/Einstell en der Entlastungsfeder(n) T ext AM-S Baurei he @ 69\mod_1305106937483_78.docx @ 634174 @ @ 1

•  Bring the machine into the transport position
•  Close the shut-off valve on the hydraulic cylinder
•  Remove the compensation springs (2,3) in the transport position of the

disc mower from the

top retaining bolt (1)

• Turn the upper adjustment pieces to change the length

The further the adjustment pieces are screwed in, the greater the relief on the mowing
unit.

• After the setting is made, attach the compensation spring on the retaining bolt again and

secure it with a washer (6) and cotter pin (7)

Pos: 27.13 /BA/Ei nstellungen/M ähwer ke/M ähwer ke AM Baur eihe/Hi nweis bei zwei Entlastungsfedern beide gl eich ei nstellen @ 69\mod_1305107374613_78.docx @ 634228 @ @ 1

Note

In disc mowers with two compensation springs, the two compensation springs must be set to

the same length.

Pos: 27.14 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
40
41
42
43
44
...
»

Содержание AM 203 S











































































Отзывы:

Нет отзывов

Похожие инструкции для AM 203 S

Бренд: Poulan Pro Страницы: 48

Бренд: Toro Страницы: 60

Бренд: Worx Страницы: 16

Pro Z 100 Lapbar

Бренд: Cub Cadet Страницы: 28

Бренд: Ransomes Страницы: 81

Бренд: Jacobsen Страницы: 52

Бренд: Toro Страницы: 2

Бренд: Yazoo/Kees Страницы: 60

Бренд: Toro Страницы: 28

Бренд: Country Clipper Страницы: 28

Бренд: GreenWorks Страницы: 164

Mowers DIESEL 1500cc

Бренд: Bad Boy Страницы: 54

Бренд: Fa-Ga Страницы: 45

Бренд: Kubota Страницы: 16

Бренд: Kubota Страницы: 45

Бренд: MTD Страницы: 7

Cub Cadet 19B70004100

Бренд: MTD Страницы: 20

Бренд: MTD Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды