Krone AM 203 S Скачать руководство пользователя страница 70

Страница: 70 / 74

Disposal of the machine

Pos: 35 /Ü berschriften/Überschriften 1/A-E/Entsorgung der M aschine @ 274\mod_1404207309028_78.docx @ 2060455 @ 1 @ 1

Disposal of the machine

Pos: 36 /BA/Entsorgung der Maschi ne/Die M aschine entsorgen @ 274\mod_1404207434449_78.docx @ 2060544 @ 2 @ 1

15.1

Disposal of the machine

After the service life of the machine has expired, the individual components of the machine must

be disposed of properly. The applicable country-specific, current waste disposal guidelines and

the legal laws must be observed.

Metal parts

All metal parts must be brought to a metal recycling centre.
The components must be freed from operating fluids and lubricants (gear oil, oil from hydraulic

system, ...) before being scrapped.
The operating fluids and lubricants must be brought separately to an environmentally friendly

disposal point or recycling centre.

Operating fluids and lubricants

Operating fluids and lubricants (diesel fuel, coolant, gear oil, oil from hydraulic system, ...) must

be brought to a disposal point for waste oil.

Synthetic materials

All synthetic materials must be brought to a recycling centre for synthetic materials.

Rubber

Rubber parts (hoses, tyres, …) must be brought to a rubber recycling centre.

Electronic scrap

Electronic parts must be brought to a disposal point for electronic scrap.

=== Ende der Liste für T extmar ke Inhalt ===

Содержание AM 203 S











































































Результаты поиска

Содержание AM 203 S

Отзывы:

Похожие инструкции для AM 203 S

Бренды по названию

Популярные бренды

Krone AM 203 S, Оригинальная инструкция по эксплуатации

Результаты поиска

Содержание AM 203 S

Отзывы:

Похожие инструкции для AM 203 S

Бренды по названию

Популярные бренды