16
Transport:
Before packing the unit for transport the “Transport Safety Device(s)” must be made
active by
turning clockwise against the mechanical stop (see Fig. 20).
Note: Models MFS 3000 - 0.3 E, 1.5 E, and 10 E are depicted above. Model MFS 3000 - 30 E
has two transport locks (not shown) on the same side of the instrument as the single transport
lock shown.
Fig. 20 Location “Transport Safety Device”
Flexible pipes or hoses can easily be connected at the permanently installed transducer.
When installing in a horizontal position, the transducer can also be turned 90° and mounted
flat, as shown in Figure 21.
Fig. 21:
Mounting variations for horizontal installation
