Appendices
100
Is the MIDI Clock (Global P1: MIDI) set to Internal or
Auto?
→
PG p.221
A combination copied using “Copy From
Combi” doesn’t record via arpeggiator as it
did when you were playing it in Combination
mode
Is Multi REC (Seq P0: Play/REC) checked?
PG p.139
Are the settings in the Copy from Combination dialog
box correct?
• In the Copy from Combination dialog box, check
the Auto adjust Arp setting for Multi REC option
before you execute the copy. This will cause the
settings to be adjusted automatically.
Can’t record Tone Adjust data
Changes you make using Tone Adjust are recorded as
system exclusive data. Did you check the Global mode
MIDI Filter Enable Exclusive check box?
→
PG p.224
RPPR does not start
Is the Seq P0: Play/REC RPPR setting checked?
Are Assign, Pattern Select, and Track set correctly?
Is the MIDI Clock (Global P1: MIDI) parameter set to
Internal or Auto?
→
PG p.221
SMF you loaded in Media mode won’t play
correctly
Execute the menu command GM Initialize to restore
the settings.
→
PG p.193
Set Bank Map to GM(2).
→
PG p.218
Arpeggiator
The Arpeggiator does not start
Is the ARP ON/OFF switch turned on (lit)?
If the arpeggiator does not start for a combination or
song, make sure that Arpeggiator Run is checked, and
that an arpeggiator is selected for Assign.
PG p.84, p.108, p.142
If the arpeggiator does not run in the Global P6:
Arpeggio Pattern page, could you have navigated
there from Combination or Sequencer mode with
settings that do not start the arpeggiator?
Is the MIDI Clock (Global P1: MIDI) parameter set to
Internal?
→
PG p.221
In the Global P0: Basic Setup page, is All ARP/DT Off
checked?
→
PG p.217
Drum Track function
The Drum Track does not start
Is the DRUM TRACK ON/OFF switch turned on (lit)?
You pressed the DRUM TRACK ON/OFF switch but
the drum track pattern did not start.
• Is the DRUM TRACK ON/OFF switch blinking?
Trigger Mode
is set to Wait KBD Trig. The drum
track pattern will start when you play the keyboard
or receive a note-on.
→
PG p.62
• Did you select a pattern that does not contain data?
• Could P000: Off be selected as the pattern?
→
PG p.62
If the drum track pattern fails to start in Combination
mode, is the Output Channel setting appropriate?
If the drum track pattern fails to start in Sequencer
mode, are the Input Channel and Output Channel
settings appropriate?
Is MIDI Clock (Global P1: MIDI) set to Internal or
Auto?
→
PG p.221
In the Global P0: Basic Setup page, is All ARP/DT Off
checked?
→
PG p.217
Drum Kits
The drumsample’s pitch does not change
You have left the Assign check box unchecked, and
want to play the drumsample at the adjacent right a
semitone lower, but the pitch does not change.
• If you have selected a drum program in Program
mode, and then want to edit the drum kit in Global
mode, go to the Prog P2: OSC/Pitch– OSC1 Pitch
page and set Pitch Slope to +1.0 before you enter
Global mode.
→
PG p.23
Effects
Effects are not audible
Have you selected effect program 000?
• Select an effect other than 000: No Effect for “IFX1–
5,” “MFX 1, 2” or “TFX.”
Are the Effect Global SW IFX 1–5 Off, MFX1&2 Off, or
TFX Off
(Global P0: Basic Setup page) settings
checked?
→
PG p.217
If you are in Combination and Sequencer mode, and
master effects are not audible when you raise the
Send1
or Send2 of the timbre/track, does Return 1 or
Return 2
from the master effect need to be raised?
→
PG p.70, p.118, p.180
Alternatively, has Send 1 or Send 2 for each oscillator
of the program used by the timbre/track been
lowered?
→
PG p.114, p.175
Note:
The actual send level is determined by
multiplying the send setting of each oscillator in the
program with the send setting of the timbre/track.
Содержание EASYSTART M50
Страница 1: ...3 E Owner s Manual ...
Страница 84: ...Arpeggiator function 78 ...
Страница 88: ...Drum Track function 82 ...
Страница 92: ...Settings for the entire M50 86 ...
