Appendices
106
R
Root directory is full
Meaning:
Your attempt to create a file or directory in
the root directory of the media would exceed the
maximum number of root directory entries.
• Either delete an existing file or directory, or Open a
directory to move down one level before creating a
file or directory.
S
Selected file/path is not correct
Meaning:
When loading a divided .PCG file, you
attempted to load a .PCG file of the same name that
was not divided or had differing contents.
• Load the correct .PCG file.
Source is empty
Meaning:
No data exists in the track or pattern that
you specified as the source.
• Specify a track or pattern that contains musical
data.
Meaning:
This message will appear when you execute
Swap Insert Effect if one of the effects to be swapped
(“Source1” or “Source2”) is a double-size effect, and is
therefore an unusable IFX number.
• If you want to execute the Swap operation on a
double-size effect, specify an IFX number to which
a double-size effect is assigned.
T
The internal memory has been corrupted, likely
due to an interruption of power while the system
was writing/saving data. This has been repaired
and the affected Bank has been initialized.
[OK]
Meaning:
A memory-write operation failed because
the power was turned off while writing data to internal
memory (e.g., while writing a program).
• Turn the power off, and then on again. The M50
will automatically initialize its internal memory.
This message will be displayed during this time.
Press OK to close the dialog box. As necessary, for
example if the preloaded bank was initialized, use
the Global mode Load Preload/Demo Data
command to load the preload data into internal
memory.
There is not readable data
Meaning:
Either the file size is 0 or the file does not
contain data that can be accessed by the load or open
operation. Alternatively, the data is damaged etc., and
cannot be loaded or accessed.
This file is already loaded
Meaning:
When loading a divided .PCG file, you
attempted to load a file that had already been loaded.
• Load the .PCG files that have not yet been loaded.
U
Unable to create directory
Meaning:
You attempted to create a directory that
would exceed the maximum path name length (76
characters for the full path name).
Unable to save file
Meaning:
When executing the Media mode Utility
menu command Copy, the copy destination path
length exceeded 76 characters.
Meaning:
When saving a file in Media mode, the save
destination path exceeded 76 characters.
Meaning:
When you executed the Media mode Utility
menu command Copy, the file management data
exceeded the size of the management area.
Y
You can’t undo this operation
Are you sure?
Meaning:
Once you enter event editing (even if you
leave event editing without actually editing an event),
it will no longer be possible to execute Compare to
listen to the previous edit. If you wish to enter event
editing, press the OK button. To cancel, press the
Cancel button.
You can’t undo last operation
Are you sure?
Meaning:
When you exit recording or event editing in
Sequencer mode, the memory area for Undo (Compare
function) is not allocated. If you wish to keep the data
that was just recorded or edited, press the OK button.
If you wish to return to the previous data (i.e., to delete
the data that was just recorded or edited), press the
Cancel button.
Meaning:
When editing in Sequencer mode, memory
area for Undo (Compare function) cannot be allocated.
If you wish to execute the edit, press the OK button (It
will not be possible to undo your edit). If you decide
not to execute the edit, press the Cancel button.
• In order to allocate memory area for Undo
(Compare function), delete unneeded data such as
songs, tracks, or patterns. We recommend that you
data to media before you execute the edit
operation.
Содержание EASYSTART M50
Страница 1: ...3 E Owner s Manual ...
Страница 84: ...Arpeggiator function 78 ...
Страница 88: ...Drum Track function 82 ...
Страница 92: ...Settings for the entire M50 86 ...
