Korg EASYSTART M50, Руководство пользователя

Страница: 23 / 120

Basic Information Basic operations
17
Introduction
Program
Combination
Sequencer
Effect
Arpeggio
Drum Track
Global
Media
Using the EXIT switch to move between pages
If you’re in a page other than page 0 (e.g., Prog P0:
Play) of each mode, pressing this switch will take you
to page 0.
This switch makes it easy to return to the main page of
the current mode:
• Press it once to go to the previously-selected tab on
the main P0: Play page (Play/REC page in
Sequencer mode).
• Press it again to go to the first tab on the main P0:
Play page (such as the main Program Play page). If
you had previously selected a parameter on this
page, that parameter will be selected.
• Press it a third time to select the main parameter on
the P0: Play page, such as the Program name in
Program mode.
Wherever you are in Program, Combination, or
Sequencer modes, pressing EXIT two times (or fewer)
will take you back to Program/Combination/Song
Select, where you can immediately use the numeric
keys or
q
/
u
switches to select a Program,
Combination, or Song.
When a dialog box is open, this switch cancels the
settings made in the dialog box and closes the dialog
box, just like pressing the Cancel button.
If a popup menu or menu is open, pressing EXIT closes
the menu.
Selecting tabs
• You can access tabbed pages by pressing the tabs
shown in the bottom line of the display.
This example shows the Program T01–08 page
through Mixer T01–08 page of Combi P0: Play.
Selecting a parameter and editing the
value
1. Press the parameter that you want to edit.
It will be highlighted. (This is called the “edit cell.”)
2. To modify the parameter value in the edit cell, use
the VALUE controllers (VALUE dial,
q
/
u
switches, numeric keys 0–9, – switch, (.) switch,
and ENTER switch).
Note: The way in which the value will change depends
on the type of parameter or object.
For example in the case of a check box object, you can
switch the value by pressing that object. You can use
the PROG SELECT switches to specify the bank for
programs etc., or hold down the ENTER switch and
press a note on the keyboard to enter a note or velocity
value (“keyboard input”).
3. You can use knobs 1–4 to edit parameters that are
assigned to the control surface.
Note: You can use the COMPARE switch to compare
the sound you’re editing with the original unedited
sound.
VALUE slider
This edits the value of the selected parameter. This
slider is convenient when you want to make large
changes in the value, or for approximate editing.
You can also use the slider as a modulation source.
q
/
u
switches
Use these when you wish to make small changes in the
value.
VALUE dial
Use this dial to edit the selected parameter’s value.
This control is convenient when you want to scroll
through a very long list of selections.
Numeric keys 0–9, ENTER switch, – switch,
(.) switch
These switches are convenient when you know the
exact value that you want to enter. Use the 0–9, –, and
decimal (.) switches to enter the value, and then press
the ENTER switch to confirm the entry.
The – switch inverts the sign (+/–) of the parameter
value; the decimal (.) switch inserts a decimal, for
entering fractional values.
Functions that use the ENTER switch in conjunc-
tion with another switch
ENTER has a few special functions when it is pressed
in combination with other switches.
Whenever a parameter on the display lets you enter a
musical note (such as G4 or C#2), or a velocity level,
you can enter the note or velocity directly by holding
down ENTER while playing a note on the keyboard.
(This is not available in menu command dialog boxes.)
By holding down the ENTER switch while you press a
numeric key (0–9), you can select up to ten menu
commands from within the current page.
In Program and Combination modes, you can hold
down the ENTER switch and press the SEQUENCER
REC/WRITE switch to use the Auto Song Setup
function. This imports the current Program or
Combination into Sequencer mode for quick and easy
recording.
While a dialog box is displayed, the ENTER switch
corresponds to the OK button. (The EXIT switch
corresponds to the Cancel button.)
In Sequencer mode, you can hold down the ENTER
switch and press the LOCATE switch to operate the
menu command Set Location.