background image

 

ii

 

Precautions

 

Location

 

Using the unit in the following locations can result in a mal-
function.

• In direct sunlight
• Locations of extreme temperature or humidity
• Excessively dusty or dirty locations
• Locations of excessive vibration
• Close to magnetic fields

 

Power supply 

 

Please connect the designated AC adapter to an AC outlet 
of the correct voltage. Do not connect it to an AC outlet of 
voltage other than that for which your unit is intended.

 

Interference with other electrical devices

 

Radios and televisions placed nearby may experience 
reception interference. Operate this unit at a suitable dis-
tance from radios and televisions.

 

Handling

 

To avoid breakage, do not apply excessive force to the 
switches or controls.

 

Care

 

If the exterior becomes dirty, wipe it with a clean, dry cloth. 
Do not use liquid cleaners such as benzene or thinner, or 
cleaning compounds or flammable polishes.

 

Keep this manual

 

After reading this manual, please keep it for later reference.

 

Keeping foreign matter out of your equipment

 

Never set any container with liquid in it near this equip-
ment. If liquid gets into the equipment, it could cause a 
breakdown, fire, or electrical shock.
Be careful not to let metal objects get into the equipment. If 
something does slip into the equipment, unplug the AC 
adapter from the wall outlet. Then contact your nearest 
Korg dealer or the store where the equipment was pur-
chased.

 

Handling of this product

 

This product contains precision components, and may 
malfunction if you fail to observe the following precautions.

• Do not subject this product to vibration or impact.

Doing so may damage internal components and cause mal-
functions.

• Do not use or store this product in locations of extremely 

low or high temperatures, such as outdoors in winter or in 
direct sunlight in summer. Avoid moving this product 
between locations of dramatically different temperatures.

If a temperature difference occurs, water droplets may form 
inside the product. Continuing to use the product in this 
state may cause malfunctions, so you should wait several 
hours before using the product.

• Do not use or store this product in locations of extremely 

high humidity.

• Do not use or store this product in excessively dusty or 

smoky locations.

 

Data handling

 

Incorrect operation or malfunction may cause the contents of 
memory to be lost, so we recommend that you save important 
data on media. Please be aware that Korg will accept no 
responsibility for any damages which may result from loss of 
data.

 

* This product uses the T-Kernel source code in compliance 

with the T-License of the T-Engine forum (www.t-
engine.org).

* Apple and Mac are trademarks of Apple Inc., registered in 

the US. and other countries. 

* Windows XP and Windows Vista are registered trademarks 

of Microsoft Corporation in the U.S. and other counties. 

* All other product and company names are trademarks or 

registered trademarks of their respective holders. 

 

THE FCC REGULATION WARNING (for USA)

 

This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful interference 
in a residential installation. This equipment generates, uses, and can radiate 
radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. How-
ever, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or 
more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Unauthorized changes or modification to this system can void the user’s 
authority to operate this equipment.

 

Notice regarding disposal (for EU)

 

If

 

 this “crossed-out wheeled bin” symbol is shown on 

the product or in the operating manual, you must dis-
pose of the product in an appropriate way. Do not dis-
pose of this product along with your household trash. 
By disposing of this product correctly, you can avoid 
environmental harm or health risk. The correct method 

of disposal will depend on your locality, so please contact the 
appropriate local authorities for details.

Содержание EASYSTART M50

























































































































Отзывы: