Konica Minolta REGIUS SIGMA2, Руководство по эксплуатации

Страница: 66 / 76

6 .2 Reader maintenance
66
6 .2 .5 Filter Cleaning
CAUTION
• Cleaning must be performed after the device power
is turned OFF, and the power supply has been
unplugged .
When doing this, clean the power supply’s plug of any
dust or debris .
Cleaning methods
1
Open the top door .
CAUTION
• Do not let foreign objects, dust or debris get inside of
the device .
Top Door
2
Make sure there is no dust on the yellow
portion inside of the device (the filter) . If
dust is present, wipe it off with a dry, soft
cloth .
Filter
3
Close the top door .
6 .2 .6 Feeding Roller Cleaning
Use the included cleaning tool to clean the feeding
roller .
Be sure to clean the feeding roller when messages
such as “Roller cleaning required” are displayed on the
image processing controller .
CAUTION
• Be sure to read the procedure before using the clean-
ing tool .
If you use the cleaning tool without reading how to
clean the feeding roller, the cleaning tool may not
perform satisfactorily .
Please be sure to read and fully understand how to
clean the feeding roller before using the cleaning tool .
Using the cleaning tool for the first time
1
Remove the protective sheet that is af -
fixed to the adhesive sheet on the back of
the cleaning tool .
After that, begin cleaning starting from Step 4 of
the “Cleaning methods” .
Protective sheet
Adhesive sheet