Konica Minolta REGIUS SIGMA2, Руководство по эксплуатации

Страница: 50 / 76

50 50
5 .1 Troubleshooting
Error Information
Appropriate action
Error
Code
Message
7400
- 7409 Initialization failed . Reader error was detected
during initialization . Open and close the top door . The device will be re-initial-
ized, so check to see if the error occurs again .
7410
7411
Erasure error was detected .
An abnormality was detected in the image-erasing device .
Now that image reading is complete, wait for the image to
be transmitted. After confirming that transmission is com -
plete, refer to “5 .3 Forcibly Removing the Cassette”(p . 61)
and remove the cassette .
Then contact Konica Minolta technical representatives .
7412
- 7414
Reader error was detected .
Refer to “5 .2 Dealing with Plate Jams”(p . 54) and remove
the plate and cassette from this device .
Then contact Konica Minolta technical representatives .
7415
Initialization failed . Reader error was detected
during initialization . Open and close the top door . The device will be re-initial-
ized, so check to see if the error occurs again .
7416
- 7419
Reader error was detected .
Refer to “5 .2 Dealing with Plate Jams”(p . 54) and remove
the plate and cassette from this device .
Then contact Konica Minolta technical representatives .
7420
Initialization failed . Reader error was detected
during initialization . Open and close the top door . The device will be re-initial-
ized, so check to see if the error occurs again .
7421
7422
Reader error was detected .
Refer to “5 .2 Dealing with Plate Jams”(p . 54) and remove
the plate and cassette from this device .
Then contact Konica Minolta technical representatives .
7650
7651
Reader error was detected . Contact Konica Minolta technical representatives .
7700
7701 Initialization failed . Reader error was detected
during initialization . Open and close the top door . The device will be re-initial-
ized, so check to see if the error occurs again .
7710
- 7746
Detected Memory error .
Once this error occurs, it cannot be solved by turning the
device power OFF and ON again . Contact Konica Minolta
technical representatives .
7750
- 7759
Detected Data error .
An abnormality was detected in the transmission data .
Confirm transmission data and communication cable. Then
turn the device power OFF and ON .
7800
7801 Parameters which cannot be processed in the
Reader Settings are specified
An abnormality was detected in the cassette size param-
eters .
Refer to “5 .2 Dealing with Plate Jams”(p . 54) and remove
the plate and cassette from this device .
Then contact Konica Minolta technical representatives .
7802 Reader error was detected .
Refer to “5 .2 Dealing with Plate Jams”(p . 54) and remove
the plate and cassette from this device .
Then contact Konica Minolta technical representatives .
7803
Parameters which cannot be processed in the
Reader Settings are specified
Examination requirement(s) have been made which can -
not be fulfilled by this device. Review current examination
requiment setting .
7810 Top door open Close the top door .
7811 Back door open Close the rear door .
7812 Left side door open Close the left door .
7999
Program data of service call reader corrupted .
Need to recover the program .
Contact Konica Minolta technical representatives .