Konica Minolta REGIUS SIGMA2, Руководство по эксплуатации

Страница: 44 / 76

44 44
4 .2 Dealing with a Broken Cassette/Plate
CAUTION
• If the plate’s front surface is significantly scratched, or the protective film on its phosphor side has been scratched or bro -
ken, immediately stop using it, and replace it with a new plate .
• If the cassette’s shape is altered due to being dropped etc., this may cause problems to exposed images, so immediately
stop using it and replace it with a new cassette .
• If an image is damaged (flawed), clean the plate and the cassette’s interior.
Make sure there are no scratches, debris, or foreign objects on the plate’s surface, refer to “6.3.1 Plate Cleaning”(p. 69), “6 .3 .1 Plate Cleaning”(p . 69), ,
and then start cleaning .
Make sure a plate is not loaded in the cassette, then perform the following steps to make sure there is no dust or debris
inside .
-Open the tray, place the tray’s opening face down, then lightly tap the cassette to remove any dust or debris .
-Use a vacuum, etc . to suck out any dust or debris that might remain inside the tray’s opening .
Perform a test exposure after cleaning, and if a diagnosis problem occurs, immediately stop using it and replace it with a
new one .
• If scratches, dirt, altered shape, discoloration, reduction in sensitivity, etc . lead to a reduction in diagnosis image quality,
or interfere with device operation, immediately stop using it and replace it with a new one .