Konica Minolta 7075/FORCE 75, Руководство по обслуживанию

Страница: 690 / 844

E-10
(2) Put the Cleaning instruction label on the top of
RADF (Fig. 38).
Fig. 41
Fig. 40
Caps
Truss head
screws
(M4 x 14)
12. Install the Working table.
(1) Open the Right upper cover and remove 2
screws securing the Upper cover (Fig. 39).
(2) Secure the Working table with the Upper cover
to the Main body with 2 truss head screws (M4
x 14). Then cover the screw holes with 2 caps
(Fig. 40).
Fig. 39
Right
upper
cover
screws
Fig. 38
Cleaning instrucion label
10 mm
Fig. 37
Operation
manual holder
Ventilation
duct
Adhesive
tape
13. Extend the Adjuster feet and adjust each length
with the spanner to make the Main body level with
the floor (Fig. 41).
14. Put the Operation sheet on the Operation panel.
VI. Operation Check
1. Set the paper in the Trays and take sample copies.
2. Inspect the copy quality with the test chart fed from
the RADF.
Check items:
Centering, Skew, Leading edge timing etc.
Adjustment:
Refer to the Service Handbook.
VII. Setting the KRDS
Refer to the Service Handbook.