Konica Minolta 7075/FORCE 75, Руководство по обслуживанию

Страница: 37 / 844

xxxv
PRODUCT SPECIFICATIONS
[1] Type
Installation Type:
Console type (floor-mounted type)
Copying method:
Indirect electrostatic method
Document tray type:
Fixed
Photosensitive material:
OPC
Sensitizing method:
Laser writing
Paper feed trays:
Three stacked trays (two for 500
sheets of 80 g/m
2 or 20 lbs paper;
one for 1000 sheets of 80 g/m 2 or 20
lbs paper)
A by-pass tray for various paper sizes
(150 sheets of 80 g/m
2
or 20 lbs
paper)
LCT (4000 sheets of 80 g/m
2
or 20
lbs paper)*1
*1: Optional
[2] Functions
Print size:
• Metric area
A3 to A5, 11x17 to 8.5x11, F4
• Inch area
11x17 to 5.5x8.5, A3 to B5R, F4
Wide paper (max. 314x459mm)*2
*2: When using LT-412
Paper size for ADU paper passage:
Max. 314x459mm to A5 or 5.5x8.5
min.
Warm-up time (20°C, rated voltage)
Less than 6 minutes*2
*2: 6 minutes is the machine for the
230VAC specification.
Warm-up time differs depending
on the Power source (voltage).
First print out time:
Mode A4/8.5x11
Manual 3.4 seconds or less
*Straight paper ejection with the
printed image facing up, paper feed
from tray 1
Continuous print speed (life size, prints/min):
Size ppm
A4/8.5x11 85
E-RDH memory capacity:
Standard 256MB
Maximum 512MB
[3] Applicable Print Paper
Plain paper:
High quality paper 60 g/m 2 or 17 lbs
to 90 g/m 2 or 24 lbs
Special paper:
High quality paper 50 g/m
2
or 13 lbs
to 59 g/m 2 or 16 lbs
High quality paper 91 g/m
2
or 24 lbs
to 170 g/m
2
or 40 lbs
(bypass feed only)
Label paper
OHP film
Blueprint master paper
(tray feed only)
High quality paper 171g/m
2
or 40 lbs
to 200g/m
2
or 45 lbs
ADU paper passage:
High quality paper 60 g/m 2 or 17 lbs
to 200 g/m 2 or 45 lbs
[4] Options
LCT: LT-402,LT-412
Expansion memory unit:
MU-401: 64MB
MU-402: 128MB
Paper exit tray
Finisher:
FS-111, FS-211
Post inserter:
PI-108
Trimmer: TU-108
Puncher: PU-108
Puncher with z-folding:
PZ-108
Printer Controller:
IP-602
Network board:
KN-306
Postscript 3:
PS-362
FORCE 85 PRODUCT SPECIFICATIONS