manualshive.com logo in svg
background image

Notice

The information in this guide is subject to change without notice.

COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR
TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN;
NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL.

This guide contains information protected by copyright. No part of this guide may be
photocopied or reproduced in any form without prior written consent from Compaq
Computer Corporation.

© 2002 Compaq Computer Corporation. All rights reserved. Printed in U.S.A.

C

OMPAQ

, A

RMADA

, LTE, and PROSIGNIA are registered in the U.S. Patent and

Trademark Office.

Microsoft, MS-DOS, and Windows are registered trademarks of Microsoft
Corporation.

The software described in this guide is furnished under a license agreement or
nondisclosure agreement. The software may be used or copied only in accordance with
the terms of the agreement.

Product names mentioned herein may be trademarks and/or registered trademarks of
their respective companies.

Maintenance and Service Guide

Prosignia Notebook Family of Personal Computers

First Edition October, 1998
Documentation Part Number 382712-001
Spare Part Number 382793-001

Compaq Computer Corporation

Содержание 140

















































































































































Отзывы: