Konica Minolta 7075/FORCE 75, Руководство по обслуживанию

Страница: 686 / 844

E-6
Fig. 22
Claws
(7) Hold both ends of the Developing unit and
remove it carefully from the Drum unit support
assembly.
(8) Pull up the claws of the upper cover to remove
it (Fig. 22).
(10) Rotate the Developing gear counterclockwise
with a minus screwdriver, to coat the Developer
around the Developing sleeve completely (Fig.
24).
Caution:
Do not rotate the Developing gear clockwise.
(13) Release the Cleaner unit by turning the Cleaner
lock lever in the arrow direction. Disconnect
the connector (1pc.) from the Stay. Hold the
both ends of the Cleaner, and pull it out along
the shape of the bracket bottom (Fig. 26).
(9) Add the developer evenly from the top of the
Agitator screw along its entire length (Fig. 23).
(11) Reinstall the Developing unit cover.
Caution:
Confirm that both the bosses of the upper cover
are put into the slots on the Developing unit (See
Figure 22).
(12) Disconnect the connector (1pc.) from the
Charging corona unit, and remove it holding
the both grips (Fig. 25).
Caution:
The Charging corona unit must be faced up when it
placed.
Fig. 23
Fig. 24
Developing sleeve
Fig. 25
Fig. 26
Boss
Stopper roller front
Cleaner lock levers
Edge saddle
Wiring band
(used as a mark)