Konica Minolta 7075/FORCE 75, Руководство по обслуживанию

Страница: 436 / 844

1 - 96
47 ADJUSTMENT
3. Multi mode
This mode is entered from the 47 mode. It ena-
bles multiple I/O checks using a single I/O check
code.
4. Multi mode operation method
Enter the 47 mode and proceed as follows:
(1) To check the input
a. Using the copy quantity button, enter the
check code for the desired I/O.
b. The 47 mode code appears enclosed in <> in
the second row of the message area.
c. Press the P button.
d. Enter the desired multi number using the copy
quantity button. (Refer to the multi mode list.)
e. The multi number will be displayed enclosed
in <>, following the 47 mode code and “-”.
I/O Check Mode
<10-01> IN:-- OUT:--
f. Press the P button.
g. Check the status of the code displayed as H
or L after “IN:” in the second row of the mes-
sage display area.
(2) To check the output
a. Press the Start button.
b. Press the Stop button after checking the out-
put.
(3) Ending multi mode
a. Turn off the main switch to exit the 47 mode
(multi mode).
Step Operation
1 Enter the 47 mode.
2 [47 Mode (I/O Check Mode) Screen]
Use the copy quantity button and enter the
code.
3 Press the P button.
4 Enter the multi number using the copy
quantity button.
5 Press the P button.
6 Check the input signal check result dis-
played after “IN:” in the second row of
the message area.
7 To perform the output check, press the
Start button to check the output load.
8 Press the Stop button to end the output
check.
9 Turn off the main switch to exit the 47
mode.
Note 1: To check another multi number in the
same code, press the P button after com-
pleting step 8.
And enter another multi number. A newly
entered number is written over the pre-
viously entered number.
Note 2: To return to the normal 47 mode, press
the Stop button while holding down the
P button after completing step 8. (The
screen will return to the 47 mode initial
state.)