Konica Minolta 7075/FORCE 75, Руководство по обслуживанию

Страница: 430 / 844

1 - 96
36 ADJUSTMENT
3. Cover sheet tray size adjustment
(PI-108 only)
This adjustment should be performed when the
cover sheet tray size cannot be detected prop-
erly.
Step Operation
1 Enter the 36 mode.
2 [36 Mode Menu Screen]
Press “
6
Finisher adjustment.”
3 [Finisher adjustment mode menu
Screen]
Press “
3
Cover sheet tray size adj.”
4 Move the side guide plates of the cover
sheet tray to the outmost positions re-
spectively and press the
Start
key on
the LCD. An end message appears on
the screen.
5 Press the
PREVIOUS SCREEN
key to re-
turn to the Finisher adjustment mode
menu Screen.
4. Trimming stopper adjustment
(TU-108 only)
Adjusting the trimming amount.
Step Operation
1 Enter the 36 mode.
2 [36 Mode Menu Screen]
Press “
6
Finisher adjustment.”
3 [Finisher adjustment mode menu
Screen]
Press “
4
Trimmer stopper adjustment.”
4 [Trimming stopper adjustment
Screen]
Press the
COPY SCREEN
key.
5 Set paper in the tray, set originals on
RADF, and press the Start button.
6 Check the trimming amount.
Specification: 2-4 mm
Note: Setting a trimming amount of 2 mm
or less may cause a trimming er-
ror.
7 If the trimming amount is not within
specs, press the C button while press-
ing the P button.
8 [Trimming stopper adjustment
Screen]
Press the
NEXT ADJUSTMENT
or
PREVIOUS ADJUSTMENT
key to select a
desired paper size.
9 Enter a value with numeric keys and
press the
SET
key.
Setting range: -99 to +99
1 step=0.1 mm
10 Repeat steps 4-9 until the trimming
amount is within specs.
11 Press the
PREVIOUS SCREEN
key to re-
turn to the Finisher adjustment mode
menu Screen.
Width
Regulation Plates
Side
guide plates
1 - 94 - 2