.
MAINTENANCE
SERVICE PROCEDURE
CHANGE OIL IN FINAL DRIVE CASE
WARNING
The oil is at high temperature immediately after the machine has been operated. Wait for the oil to cool down before starting
the operation.
There is danger that oil spouts out due to the internal pressure. When removing the plug, work from the side, turn the plug
slowly to release the internal pressure, and remove it carefully.
Refill capacity: 75 liters (19.82 US gal)
1. Remove oil filler plug (F), then remove drain plug (1) and level
plug (G), and drain the oil.
Remove all the mud and dirt from around oil filler plug (F)
before removing it. Be careful not to let any dirt or sand get in
when adding oil.
2. After draining the oil, tighten drain plug (1).
3. Remove level plug (G), refill oil from oil filler plug hole (F) until
the oil overflows the level plug hole.
After refilling, tighten the plugs.
4 - 83
Содержание D475A-5E0
