Kolver 035001, Руководство пользователя

Страница: 23 / 64

Vers. 291020
23
the front display; by setting "Ext" the functions can be enabled only with external inputs on
CN3 connector (See input on CN3). By setting "Int + Ext" the functions can be enabled
both from display and from remote.
2) RESET TYPE: this function allows to manage the reset according to the set function. If set
to OFF, the function is disabled and no RST button will appear on the main screen. If set to
PRG, it allows the program in progress to be reset at any time during the cycle. If set to
SCREW, it allows to reset the screw made even if correct. If the sequences are enabled, you
can also set RESET SEQ, in this case if you activate the RST function the unit will reset the
whole sequence.
3) REMOTE PR: if enabled it allows to set the programs through the Input CN3 connector
(see input menu related to the selection of programs) the setting must be done in binary. 63
programs can be set remotely.
4) REMOTE SEQ: if enabled it allows to set the programs through the Input CN3 connector
(see input menu related to the selection of sequences) the setting must be done in binary.
The sequences that can be set remotely are 7.
5) BARCODE MODE: it allows to choose the barcode mode.
OFF: barcode disabled.
ON prog: you can select the program to be executed by scanning the bar code of the
product. The unit compares the scanned code to the one previously entered in each
program. If the two codes match, the program is loaded; otherwise it will display
Error
Barcode . The scanned product code is also printed on the serial port of the control unit (see
paragraph “ serial print ”).
ON S.N.: the product code is required before running a program or a sequence. The product
code is printed on the serial port of the control unit.
ON Seq
: you can set the Sequence by scanning its barcode. The code scanned is compared
with the sequence entered in the menu. If the two codes match, the sequence set is loaded,
otherwise display “
Repeat scan ”. The read code is also printed on the serial port of the
control unit (see section Serial Print).
SCREEN 3/4
1- LANGUAGE: This option allows to choose among the languages available: English,
French, German, Italian, Spanish and Portuguese.
1
2
3
4
5
6
7 8 9