Kolver 035001, Руководство пользователя

Страница: 18 / 64

Vers. 291020
18
SEQUENCE SETTINGS:
From main manu, select SEQUENCE SETTINGS and it’s possible to enter in the SEQUENCE
SETTINGS screen related to the setting of the program sequences.
1- SEQUENCE: If enabled, the sequence function is activated in place of the program
function. Enabling this function also changes the main screen (see main sequence screen).
The current sequence is the one displayed in the box CURRENT SEQ.
2- CURRENT SEQ.: It allows to view sequence in progress and to access the SEQ screen (see
4). The sequences that can be set are 8 and are distinguished by letters from A (first
sequence) to H (eighth sequence).
3- To enter the barcode of the part. To be used only if you want to select the sequence
remotely by scanning the barcode of the part itself. It can be set up to 16 alphanumeric
characters. QR code bars are not supported. Pressing the value box the SCAN BARCODE
screen gets active. From this screen it is also possible to confirm or repeat the scan or
cancel the bar code set.
4- MENU SEQ. : Pressing this box, the SEQ screen gets active.
3
2
5
4
1