Kolver 035001, Руководство пользователя

Страница: 22 / 64

Vers. 291020
22
6- REV. BUTTON: This function allows to choose 2 modes of operation of the reverse
function (either by reverse switch on the screwdriver or by remote from CN3). The modes
that can be set are button and switch modes.
BUTTON mode: start and reverse functions work as two simple buttons, pressing one or the
other button activates the respective function. On the screwdriver if you press start the
white LED will light up and if you press reverse LED light.
SWITCH mode: by pressing the reverse button the reverse function is stored in the
screwdriver (blinking led flashing), pressing the screwdriver start will always reverse (led
fuchsia on) if you press the reverse button the LEDs turn off and pressing the screwdriver
start lever will turn to start (white LED on).
6- Saving key: to save parameters and/or return to the previous menu. If you have changed any
parameters, after touching this key, the SAVE CHANGES screen appears and you have to
choose to save or not. After that, you will return to the main menu screen.
7- To go to the previous screen of Settings Menu.
8- To go to the following screen of Settings Menu.
9- To go from BUTTON to SWITCH functions and viceversa.
10- To go from BUTTON to SWITCH functions and viceversa.
SCREEN 2/4
1) CMD OK-ESC-RESET: This function allows to choose from where the OK-ESC and
RESET functions can be enabled. By setting "Int" the functions can only be enabled from
1
2
3
4
5
6