Koden KGP-920, Руководство по эксплуатации

Страница: 85 / 132

KGP-920 Chapter 8
Setup Procedure
93121662-00 8-13
(1) Press [ MENU ] key until Menu options 1 to 9 appears.
(2) Press [ 5 ] key to select “ 5:COMP. ”.
(3) Press [ 3 ] key to select “ 3:MAG.V ”.
(4) Press [ ] or [ ] key to move cursor onto “ AUTO ” .
(5) Press [ ENT ] key.
(Manual compensation)
(1) Press [ MENU ] key until Menu options 1 to 9 appears.
(2) Press [ 5 ] key to select “ 5:COMP. ”.
(3) Press [ 3 ] key to select “ 3:MAG.V ”.
(4) Press [ ] or [ ] key to move cursor onto “ MANUAL ” .
(5) Press [ ENT ] key.
(6) Press [ ] key .
(7) Press [ SEL ] key to change the positive (+) or negative (-) sign of correction offset.
or
(8) Press [ 0 ] key to use the current positive (+) or negative (-) sign as it is.
(9) Enter a (4-digit) compensation offset using numeric keys.
(10) Press [ ENT ] key.
8.4.5 Displaying local time
Initial setup: 00:00 hour
You can display your local time by entering a time difference from the Greenwich Mean Time (GMT).
See the following figure 8.1 to determine zone time difference.
(1) Press [ MENU ] key until Menu options 1 to 9 appears.
(2) Press [ 5 ] key to select “ 5:COMP. ”.
(3) Press [ 4 ] key to select “ 4:TIME ”.
(7) Press [ SEL ] key to change the positive (+) or negative (-) sign of correction offset.
or
(8) Press [ 0 ] key to use the current positive (+) or negative (-) sign as it is.
(9) Enter a time difference from GMT using numeric keys.
(10) Press [ ENT ] key.
initial setup: 0.0
o
Setup range: -180.0° to +180.0°
NOTE: Press to clear incorrect
Input. You can reenter
Numeric data.
CLR
An error (compensation amount)
From true bearing is shown
An error (compensation amount)
From true bearing is shown