Koden KGP-920, Руководство по эксплуатации

Страница: 79 / 132

KGP-920 Chapter 8
Setup Procedure
93121662-00 8-7
(Selecting a station in the manual mode)
Internal beacon receiver system
In the manual mode of internal beacon receiver system, specify the station number between 001 and
480. (Refer “Table of DGPS reference stations” of supplement.)
(1) Press [ MENU ] key until Menu options 1 to 9 appears.
(2) Press [ 4 ] key to select “ 4:DGPS ”.
(3) Press [ ] or [ ] key to move cursor onto “ NEXT ” and 2/2 page is displayed.
(4) Press [ 1 ] key to select “ 1:STN SEL ”.
(5) Press [ ] or [ ] key to move cursor onto ” AUTO ”.
(6) Press [ ENT ] key.
(7) Press [ ] or [ ] key to move cursor onto ” MANUAL ”.
(8) Press [ ENT ] key.
(9) Press [ ] key to move cursor to the station number field.
(10) Enter station number (001 to 480) by numerical keys.
(11) Press [ ENT ] key.
External beacon receiver system
In the manual mode of external beacon receiver system, frequency and bit rate of the receiving beacon
station must be entered.
(1) Press [ MENU ] key until Menu options 1 to 9 appears.
(2) Press [ 4 ] key to select “ 4:DGPS ”.
(3) Press [ ] or [ ] key to move cursor onto “ NEXT ” and 2/2 page is displayed.
(4) Press [ 1 ] key to select “ 1:STN SEL ”.
(5) Press [ ] or [ ] key to move cursor onto ” AUTO ”.
(6) Press [ ENT ] key.
(7) Press [ ] or [ ] key to move cursor onto ” MANUAL ”.
(8) Press [ ENT ] key.
Frequency Initial setup: 283.5kHz
Selectable range: 283.5 to 325.0kHz
Bit rate Initial setup: 200bps
Cursor Cursor
Description of the station number
001 - 020 : Numbers which can be registered by the user.
021 - 030 : Numbers which are stored as the beacon almanac data.
031 - 480 : Numbers stored in the ROM (worldwide beacon stations are stored).