30
Display Messages
This setting toggles between On and Off. When this feature is On, status messages such as “No
signal detected” or “Standby Active” appear in the lower-right corner of the screen.
Display Startup Screen
This setting toggles between On and Off. When this feature is On, the startup screen appears
when the projector starts up and remains until an active source is detected. The startup screen
contains contact information. When it is off, a plain blue, black or white screen is displayed
instead of the startup screen.
Reset
Highlight Reset then press
menu/select
to reset the options in the menus (except Language,
Video Standard, Ceiling and Rear Project, Screen Aspect, Video Standard, and Standby Time) to
their original settings.
Language Menu
You can display the on-screen menus in English, French, German, Spanish, Portuguese,
Chinese, Japanese, or Korean.
Press the
menu/select
button to display the Main menu, press the arrow buttons to highlight
Language, and then press
menu/select
again to access the Language menu.
Press the arrow buttons to highlight the desired language, and then press
menu/select
. Press
menu/select
to exit this menu and return to the Main menu.
Status Menu
This is a read-only menu for informational purposes. To display the Status menu, highlight Status
from the Main menu, and then press
menu/select
.
Lamp Hours Used
Indicates how many hours the current lamp has been in use. The counter starts at zero hours and
counts each hour the lamp is in use. Replace the bulb when the brightness is no longer
acceptable. See “Replacing the Projection Lamp” on page 31 for details.
Video Standard
Shows the video standard being displayed.
Computer Resolution (computer sources only)
Shows the resolution of the computer being displayed.
Source
Indicates the active source, PC 1-Analog, PC 1-Digital, PC 2-Analog, PC 2-Component, Video 3-
Component HDTV, Video 1 S-Video, Video 2-Composite, and Video 3-Component.
Software Version
Indicates the projector’s software version. This information is useful when contacting Technical
Support.
