27
Video Standard
NOTE:
If you already know the video standard used in your geographical area, it’s often best to
manually select it.
When Video is set to Auto, the projector attempts to pick the video standard (NTSC, NTSC 4.43,
PAL, PAL-M, PAL-N, PAL 60 or SECAM) automatically based on the input signal it receives. (The
video standard options may vary depending on your region of the world.)
The input signals for SECAM, PAL-M, PAL-N, and PAL 60 video are similar to other video signals
and cannot be automatically detected, therefore they must be chosen manually.
If the projector is unable to detect the correct standard, the colors might not look right or the
image might appear “torn.” If this happens, manually select a video standard.
Highlight
Video standard
, press
menu/select
,
use the left or right arrows to cycle through the
options, then press
menu/select
to select.
Image Menu for Computer Sources
To access the Image menu settings, press the
menu/select
button to display the Main menu,
press the down arrow to highlight Image, then press
menu/select
again to access the Image
menu.
Resize
Resize
allows you to select from among four different re-sizing options. The default is
Enhanced
Widescreen
, which preserves the aspect ratio of the original theater version and is designed to be
used with content that is Enhanced for Widescreen TVs. This option yields more detail than
Widescreen Letterbox.
Widescreen Letterbox
also preserves the 16x9 aspect ratio of the original
theater version, but the image is placed in a 4x3 space, so black bars appear at the top and
bottom of the image.
Standard
resizes the image from its original version to fit a standard 4x3
aspect ratio screen.
Native
displays the image with no resizing.
Highlight
Resize
, press
menu/select
,
use the left or right arrow buttons to cycle through the
options, then press
menu/select
to select.
Zoom
This allows you to enter zoom mode without using the remote. Highlight
Zoom
, press
menu/select
,
use the left or right arrow buttons to turn zoom mode on, and then press
menu/select
. Exit the
menus to use the zoom feature. The zoom icon appears in the lower right corner. Use the
key-
stone +
button to zoom in and use the
keystone -
button to zoom out. Use the keypad navigation
buttons on the keypad to pan the zoomed image. To exit zoom mode, either turn the feature off in
the Image menu or press the
zoom mode
button on the remote.
Auto Image
The projector automatically adjusts tracking, signal synchronization and vertical and horizontal
position for most computers. If you want to adjust these features manually, you must turn off
Auto
image
first.
Highlight
Auto image
,
press
menu/select
,
then press the left or right arrow buttons to turn this
feature off and on.
