29
Auto Color Gain
When this feature is on, the projector automatically sets the red, green, and blue color gains for
each source. When it is off, you can manually adjust the color gains.
Red, Green, Blue
To manually adjust the color gains:
1. Turn Auto Color Gain off.
2. Highlight Red, Green, or Blue, press
menu/select,
use the arrow buttons to adjust the gain, and
then press
menu/select
.
Control Menu
To access the Control menu settings, press the
menu/select
button to display the Main menu,
press the down arrow to highlight Control, then press
menu/select
again to access the Control
menu.
Auto Source
When this feature is on, the projector automatically finds the active source, checking the default
source first. When this feature is off, the projector defaults to the source selected in Default
Source. To display another source, you must manually select one by pressing the
source
button
on the keypad or the
data
or
video
button on the remote.
Highlight
Auto source
;
press
menu/select
, then press the left or right arrow buttons to turn this
feature off and on.
Default Source
This determines which source the projector checks first for active video during power-up. Select
among PC 1-Analog, PC 1-Digital, PC 2-Analog, Video1 S-Video, Video 2-Composite, and Video
3-Component.
Highlight
Default source
, press
menu/select
, and use the left or right arrows to cycle through the
options, then press
menu/select
to select.
Standby Time
This option lets you select how long the lamp stays on and the blank screen is displayed when
the projector enters standby mode before the projector turns off. Select among 1, 5, 10, 15 and
30 minutes and 1 and 2 hours by clicking the left or right arrow buttons and cycling through the
options.
Advanced Menu
Rear Project
When you turn
Rear Project
on, the projector reverses the image so you can project from behind a
translucent screen.
Highlight
Rear Project
, press
menu/select
, then press the left or right arrow buttons to turn this
feature off and on.
Ceiling Project
When you turn
Ceiling Project
on, the projector turns the image upside down for ceiling-mounted
projection. Highlight Ceiling Project, press
menu/select
, then press the left or right arrow buttons
to turn this feature off and on.
