22
Forward/back buttons (remote only)
These buttons are not used with video sources.
These buttons act like the page up and page down buttons on your computer’s keyboard. You
can use them to advance through a slide show in PowerPoint™ presentations. To use this
feature, you must purchase an optional M1-DA cable and connect the USB connector on that
cable to the computer.
Up/down/left/right arrow buttons (remote only)
Use these buttons to navigate through and make adjustments to the on-screen menus. See
“Using the On-Screen Menus” on page 23 for details.
Power button
This turns the lamp on and off. See page 11 for startup instructions and see page 17 for
shutdown instructions.
Zoom mode
This activates the zoom feature. When you press this button, the zoom icon appears in the lower
right corner of the screen. Press the
zoom +
button to zoom in on part of the image, press the
zoom -
button to zoom out. When the image is zoomed, you can use the up/down/left/right arrow
buttons to display a different part of the zoomed image (pan the image). Press
zoom mode
again
to exit the mode and return the image to normal size.
You can also turn Zoom mode on using the Image menu and zoom and pan the image using the
keystone buttons and arrows on the keypad. See page 27 for details.
Zoom +/- (remote only)
This allows you to zoom in and out on a part of the image.
Standby
When you press
standby
, the display and audio turn off and a blank screen is displayed for 15
minutes. You can change the amount of time the projector stays in standby mode; see page 29
for details. The LED lights amber while the projector is in standby.
If you press
standby
again within 15 minutes, the projector returns to normal operations
immediately. The LED changes from amber to green.
If you don’t press
standby
again, the lamp turns off after 15 minutes. The LED blinks amber and
the fans run while the projector cools down, then the projector shuts off and the LED lights solid
green.
Volume (keypad only)
To increase the volume, press
. To decrease the volume, press
volume -
.