23
Using the On-Screen Menus
The projector
has menus that allow you to make image adjustments and change a variety of
settings. Most of these adjustments aren’t available directly from the keypad.
NOTE:
Some menu items may be grayed out (dimmed) at certain times. This indicates the item is not
applicable to your setup or the item is not enabled until another selection is made.
To open the on-screen menus, press the
menu/select
button on the keypad or remote. (The
menus automatically close after 30 seconds if no buttons are pressed.) This displays the Main
menu and changes the volume, source, and standby buttons on the keypad to menu navigation
and adjustment buttons (the arrow LED’s around the buttons light green to indicate the change).
Press the corresponding buttons to move the cursor up and down, or use the arrow buttons on
the remote. The selected menu is highlighted.
To change a menu setting, use the up and down arrow buttons to move the cursor up and down
to the item you want to change (the selected item is highlighted), then press
menu/select
. When
an item is selected, its button appears depressed to provide a visual indication of selection. Use
the left and right arrows to adjust the setting or turn it on and off. Press
menu/select
when you are
done. Press the up and down arrows to move to another setting. When you have completed your
adjustments, navigate to Exit, and then press
menu/select
. You are returned to the top of the Main
menu. Press
menu/select
again to exit the Main menu, or navigate to another submenu.
Display Menu
To access the Display menu settings, press the
menu/select
button to display the Main menu,
press the down arrow to highlight Display, then press
menu/select
again to access the Display
menu.
Keystone
This option helps to keep the image square as the angle of projection is changed. Use this
feature to adjust the image vertically and make a squarer image. See page 21 for details on
keystone adjustments.
Press the down button to highlight Keystone, and then press
menu/select
. Use the left and right
arrows to adjust the keystone setting. Press
menu/select
to accept your changes.
Brightness
Adjusting the brightness changes the intensity of the image.
Use the up and down arrows to highlight Brightness, press
menu/ select
, use the arrows to adjust
the brightness, then press
menu/select
to accept your changes.
Contrast
The contrast controls the degree of difference between the lightest and darkest parts of the
picture. Adjusting the contrast changes the amount of black and white in the image.
Use the up and down arrows to highlight Contrast, press
menu/select
, use the arrows to adjust
the contrast, then press
menu/select
to accept your changes.
