17
If your HDTV tuner has a DVI or component output:
For DVI, connect an optional DVI cable into the connector labeled “PC 1”. For component,
connect an optional component video cable into the connector labeled “video 3”. Follow the
instructions in the previous section to connect and display these sources.
To play a video game
To play a game from a video machine:
Connect your equipment as described in “Connecting a Video Device” on page 9.
To play a video game from a computer:
Connect your equipment as described in “Connecting a Computer” on page 18.
To connect a camcorder
Connect your equipment as described in “Connecting a Video Device” on page 9.
Turning Off the Projector
If you want to turn off the projector for a short period of time, press the
standby
button on the
keypad or remote. This blanks the screen for fifteen minutes, but keeps the projector running.
(You can change the amount of time the projector stays in standby mode; see page 29 for
details.) After 15 minutes, the lamp goes out. To exit standby mode, press the
standby
button
again. (It may take several seconds for the projection lamp to reach full power and project the
image again.) See page 22 for details on standby mode.
NOTE
: Lamp life will be extended if you turn the power off, then wait 1 minute while the lamp cools
before unplugging the projector. The Lamp LED will light green when the lamp has cooled.
To turn off the projector, press the
power
button (you can cancel the shutdown by pressing the
power
button again within 10 seconds). The lamp turns off and the LED blinks amber for a minute
while the fans continue to run to cool the lamp. When the lamp has cooled, the LED lights green
and the fans stop. Unplug the power cord to completely power off the projector.
