24
Tint
NOTE:
The color setting applies to video sources only. The tint setting applies to NTSC video sources
only.
The tint adjusts the red-green color balance in the projected image.
Use the up and down arrows to highlight Tint, press
menu/select
, use the arrows to adjust the tint, then press
menu/select
to accept your changes.
Color
The color setting adjusts a video image from black and white to fully saturated color.
Use the up and down arrows to highlight Color, press
menu/select
, use the arrows to adjust the color, then press
menu/select
to accept your
changes.
Sharpness
This setting adjusts sharpness of a video image.
Use the up and down arrows to highlight Sharpness, press
menu/select
, use the arrows to cycle through the options soft, med-soft, medium, med-hard,
and hard, then press
menu/select
to accept your selection.
Screen Aspect
This setting adjusts display format of a video image or screen aspect ratio.
Use the up and down arrows to highlight Screen Aspect, press
menu/select
, use the arrows to choose between 4:3 and 16:9, then press
menu/select
to
accept your selection.
Blank screen
Blank Screen determines what color is displayed when there is no active source and when the
projector is in standby.
Use the up and down arrows to highlight Blank screen, press
menu/select
, use the arrows to cycle through the options blue, black, and white, then press
menu/select
to accept your selection.
Audio Menu
Volume
You can also adjust the volume directly from the projector’s keypad.
Use the up and down arrows to highlight Volume, press
menu/select
, use the arrows to adjust the volume, then press
menu/ select
to accept your
changes.
Mute
This mutes the sound.
Use the up and down arrows to highlight Mute, press
menu/select
, use the left or right arrow to turn mute on and off (a green dot indicates a feature
is on), then press
menu/select
to accept your changes.
