manualshive.com logo in svg

Knick SensoGate WA 133 Series, Руководство пользователя

Поделиться
Скачать
Knick SensoGate WA 133 Series Скачать руководство пользователя страница 7

7

Return of Products/Return Form

Please contact our Service Team before returning a defective device. Ship the cleaned device to 

the address you have been given. If the device has been in contact with process fluids, it must be 

decontaminated/disinfected before shipment. In that case, please attach a corresponding return 

form, for the health and safety of our service personnel (see Declaration of Contamination).

Intended Use

SensoGate WA 133

Intended Use

The SensoGate WA 133 is a pneumatically operated retractable fitting. It allows sensors to be 

immersed in and retracted from liquid media, e.g., for process analytics.
The SensoGate WA 133 retractable fitting allows:

•  immersing and retracting the sensor under process pressure (retractable fitting)
•  calibrating or adjusting the measuring system under process conditions  

(pressure and temperature)

•  cleaning the sensor in the running process
•  replacing the sensor in the running process (in Service position)
•  variable process adaptation by the customer

The retractable fitting is suitable for installing the following sensors:

•  sensor with solid electrolyte, 225 mm long, 12 mm diameter and 

PG 13.5 thread

•  sensor with liquid electrolyte, 250 mm long, 12 mm diameter

!

NOTICE: Safe Use of the Retractable Fitting!

If you are not sure whether the retractable fitting can be safely used for your intended 

 application, contact Knick!

To ensure safe use of the equipment, you must observe the temperature and pressure ranges 

given in the Specifications of this user manual.

Содержание SensoGate WA 133 Series













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды