50
8.4.2 Meaning of the “Feed Cycles” parameter
1
“Number of grinding cycles per feed”: Grinding cycles in the respective step; if the value is
“0”, the step will not be carried out
2
“Feed after all grinding cycles”: Distance traveled by the knife after completing the respec-
tive step and moving to the next (in mm)
NOTICE
The aforementioned parameters are related
to steps 2 - 10.
To change the parameter, tap on the respective field highlighted in yellow. The window (8-16)
opens for “Number”.
Select the desired number and confirm with “OK”
(8-16/1).
The touch panel field “Cancel” closes the window
without recording the number.
Figure 8-15
“Feed Cycles” parameter
1
2
3
4
8. Control
Figure 8-16
Editing “Number” parameter
1
