34
Figure 7-10
Polishing / deburring the cutter
knife
1
Using the “Knife feed forward” button (7-9/2),
run the copy grinding plate to the wet-grinding
belt until a grinding noise can be heard.
Press the “Start / Stop” button (7-9/1). The grind-
ing program will start.
After completing the grinding process, the copy
grinding plate will again run to its initial position.
Remove knife and polish and deburr on the finned
brush (see chapter 7.5).
After the second knife, only press the
“Start / Stop” button (7-9/1) to start the grinding
process. There is no need to press manually.
Sharp cutting edges.
Serious cutting injuries may result.
CAUTION
7. Operation