42
7. Operation
7.8 Replacing the finned brush
To change the finned brushes, turn the star han-
dles (7-20/1) counter-clockwise.
Then remove the guard carefully and clean as
necessary.
Loosen the nut with the included flat wrench,
carefully pull the old finned brush downwards,
and replace with a new one.
Then mount the complete guard again in reverse
order.
Verify that all parts are functioning properly!
ATTENTION
Only original finned brushes approved by
KNECHT Maschinenbau GmbH may be used.
Incorrect finned brushes can damage the
blades.
Do not switch on the machine with the protection hood is removed!
Serious injury may result!
CAUTION
Figure 7-20
Changing the finned brush
1
1
