38
7. Operation
7.5 Deburr cutter knife with the finned brush
There is a risk that hands, hair, and clothing may be pulled in while the
grinding machine is switched on.
Never hold the cutting edge against the rotation direction of the finned
brush.
Polishing gives rise to grinding particles that could enter the eyes. Wear
safety glasses. Wear a face mask.
Serious injury may result!
CAUTION
The burr created on the knife during the grinding
process is removed by the finned brush. This will
help the cutter knife retain its final sharpness.
Hold the polishing paste briefly against the run-
ning finned brush before the polishing / deburring
process.
To polish / deburr cutter knifes, unclamp from the
grinding device and run along the finned brush
(7-14/1) at a steep angle.
Alternately polish the upper and lower side of the
knife until the burr is removed.
Figure 7-14
Polishing / deburring the cutter
knife
1
