31
7. Operation
With the pin in front, push the limit switch cam
(7-3/1) under the copy grinding plate and tighten
the star handle (7-3/2).
The cam defines the end of the travel path and
triggers movement in the opposite direction.
ATTENTION
If the cam is not attached for the end
position, the copy grinding plate will move
down from the guide carriage and may fall
off and become damaged.
Place knife (7-4/1) on the mounting for the copy
grinding plate and turn latch (7-4/2) onto knife.
Risk of injury on the chain sprocket; fingers, hair, and clothing may
become entangled.
Sharp cutting edges. Serious cutting injuries may result!
Wear protective gloves.
CAUTION
Figure 7-3
Mounting the limit switch cam
1
2
Figure 7-4
Clamping the cutter knife
1
2
