26
Fill water tank (6-1/1) with approx. 15 liters of
water.
Connect phase inverter plug with the on-site outlet (3x 400 V, 16 A).
Turn “Wet-grinding belt” switch (3-3/1) to “ON” position. The wet-grinding belt and finned brush
will start rotating.
Check the direction of rotation of the finned
brush.
The direction arrow (6-2/1) indicates the direction
of rotation of the wet-grinding belt / finned brush.
If the finned brush is rotating in the right direc-
tion, then the wet-grinding belt is also rotating in
the correct direction.
If the direction is rotating in the wrong direction,
have the phase reversed by a qualified electrician.
Switch off the grinding machine.
6. Commissioning
All work on the machine may only be performed by trained personnel.
Observe the local applicable safety and accident prevention regulations.
There is a risk that hands, hair, and clothing may be pulled in while the
grinding machine is switched on.
Serious injury may result. Wear personal protective equipment.
CAUTION
Figure 6-1
Filling the water tank
Figure 6-2
Checking the direction of rotation
1
1