27
6. Commissioning
Figure 6-3
Mounting the copy grinding device
Figure 6-4
Distance of knife to wet-grinding
belt
Insert plug for the copy grinding device into the
USK 230 grinding machine.
Completely install and inspect the protective
equipment before commissioning.
Attach copy grinding device spacer block (6-3/1)
using a hex key.
Then attach the clamping arm (6-3/2) of the
HV 208 with the star handles (6-3/3) on the spacer
block.
When calibrating the angle scale, a copy grinding
plate is inserted into the machine with the corre-
sponding knife.
Switch on the grinding machine.
Switch on copy grinding device using the main
switch (3-7/1) and release “Emergency off” but-
ton (3-8/2).
Set the “Manual / Automatic” selector switch (3-
8/8) to “Automatic” and press the “Start / Stop”
button (3-8/4).
Check distance between wet-grinding belt and
copy grinding plate. A distance of 6 mm is neces-
sary for a grinding angle of 25°.
After presetting to approx. 6 mm, set the
“Manual / Automatic” selector switch (3-8/8) to
“Manual” and mount a new wet-grinding belt.
Set the “Manual / Automatic” selector switch
(3-8/8) to “Automatic” and press the“Start / Stop”
button (3-8/4). A bevel will now be ground onto
the knife.
After the program ends, release the knife and
measure the ground angle with the protractor
provided.
1
2
3
3
