Knauer BlueShadow Detector 40D, Инструкция по эксплуатации

Страница: 63 / 75

57
BlueShadow Detector 40D Instructions V7647
9. Transport and storage
Regarding the following information, carefully prepare the device for
transport or storage .
9.1 Taking the device out of operation
The device is switched off .
Procedure Process
1. Pull the power plug out of the socket and then out of the device .
2. Pack the power cable together with the device .
Disconnect all electrical connections . Remove the accessories and pack
the device for transport or storage .
9.2 Packing the device
ƒ
Original packaging: Ideally you should use the original transport
packaging .
ƒ
Lifting: Grab the device around the center of both sides and lift it into
the packaging .
9.3 Transporting the device
Carefully prepare the device for transport or storage . If you want to return
your device to KNAUER for repairs, enclose the Service Request Form
which can be downloaded from our website .
For a secure transport, note the weight and dimensions of the device
(see „Technical data“ on page 59) .
Bruising danger
Damage to the device by carrying or lifting it on protruding housing
parts . The device may fall and thus cause injuries .
 Lift the device only centrally on the side of the housing .
Clasp the device at its side panels and lift it out of the packaging .
9.4 Storing the device
Make sure that all tubes and capillaries have been drained or filled with
flushing solution (e .g . isopropanol) before storage . To avoid algae for-
mation, do not use pure water . Close all inlets and outlets with blind
screwings .
The device can be stored under the ambient conditions described in
chapter „Technical data“ on page 59 .
Prerequisites
Next steps
Device data
Lifting
Storage conditions