Knauer BlueShadow Detector 40D, Инструкция по эксплуатации

Страница: 44 / 75

38 Operation
BlueShadow Detector 40D Instructions V7647
5.6.2 Running a program
Process
Figure
1. Navigate through the main screen using the
menu key and the left arrow key to get to
the program/link screen .
2.
Move the cursor to the area behind the P, press
and type in the program number via the nu-
meric pad or use the vertical arrow keys .
3. Upon entering the program number, the detec-
tor will load the program and program status
will be shown in the first line (left) as „H“ („H“
Hold) .
4.
Navigate the cursor with the horizontal keys
to the status symbol “H” and press the up-
ward key to change the status from Hold “H”
to Run “R” (program starts running) .
5. You can again go back from Run “R” to hold “H”
by pressing the downward key with the cur-
sor at the status symbol position at any time .
6. You can unload the program by pressing the
downward key another time (“H” will disap-
pear) and the detector settings before the start
of the program will be restored .
7. After the program has been completed, the
display switches into the status “E” (End) . The
detector will preserve the settings of the last
program line until you clear the program status .
8. To do so, navigate the cursor to the program
status symbol and use the downward key
to clear the status . Also, you might press the
upward key to return to hold and run mode .