Suspension Arm Systems Independant
84
Revision 1
7.9.7
Mounting the Front Side Claddings on the Spring Arm
The illustration shows the spring arm
. The mounting process for the extension arm with
spring arm
is identical.
For reasons of simplification, the illustration shows the spring arm
without cables.
•
Attach the left side cladding and insert
2 plastic pins into the holes on the
spring arm.
The plate must snap into the guide (not
illustrated) of the side cladding .
•
Insert the side cladding into the
holder on the front of the right side
cladding , guide it to the spring arm and
insert 2 plastic pins into the holes on
the spring arm.
The plate must snap into the guide (not
illustrated) of the side cladding .
•
Carefully guide 2 flaps on the bottom
into each other and connect with each
other.
Make sure the side cladding is safely in place:
•
The plate must glide into the guide (not
illustrated) of the side cladding.
•
The side claddings must fit snugly one
inside the other (without gaps).
Fig. 7-42:
Mounting the front side claddings on the spring arm
