Suspension Arm Systems Independant
46
Revision 1
Mounting the tension relief on the ceiling tube
As an example, the illustration shows the spring
arm
or extension arm with spring arm
without pre-installed cables.
•
Insert 1 Allen cylinder screw M10 x 25 mm
and retaining washer S10 into the tension
relief bracket .
•
Position the tension relief bracket in the
ceiling tube
in a way that the recess of
the tension relief bracket points towards the
ceiling tube wall.
•
Place pre-installed cable into the recess
of the tension relief bracket .
•
Screw tension relief bracket on the spring
arm
or extension arm with spring arm
using the cylinder screw and retaining
washer
.
Ensure that the cable is not
pinched.
•
Establish the plug connection / with the
control cable and press the tension relief
into the tension relief bracket .
Make sure the tension relief is securely in place:
•
The control cable must be securely relieved
of pressure in the pressure relief .
•
Guide the control cable through the ceiling
tube
and the spring arm
or extension
arm with spring arm
to the control board.
Fig. 7-10:
Mounting the tension relief on the ceiling tube
