Suspension Arm Systems Independant
26
Revision 1
4.2
The Most Important Safety Information at a Glance
Please also comply with the safety instructions in the following sections.
4.2.1
Operation
WARNING
Risk of injury from collapse of the suspension arm system if the maximum load-
bearing capacity is exceeded!
Exceeding the maximum permissible load-bearing capacity can cause the suspension arm
system or its components to loosen from the anchorage and fall down:
•
Do not exceed the maximum load-bearing capacity of the suspension arm system and its
components, see section 9.2 “Technical Data”, page 100.
•
Do not hang or install any additional loads on the extension arm, the M6 service head, or
end devices.
Collisions with other devices, walls or ceilings can damage the suspension arm system and
the M6 service head and can cause important means of supply to fail:
•
Check the M6 service head and the suspension arm system for possible damage after any
collision.
•
In case of doubt, notify your supplier.
