King Long XMQ6127 series, Руководство по эксплуатации

Страница: 62 / 162

Operation Instruction
0-T-2
④
. Hand Wash System: The toilet is
equipped with a water pump for the hand wash
faucet. When the button is pushed, the water
pump is turned on for a certain period of time
(normally 3-5 seconds). The water will keep
running until the time is up. The waste water is
drained to a holding tank. One can push the
soap dispenser for the hand wash soap.
⑤
. Toilet Flush System: Push the
flush button, produce stream (about
300-500ml), the drain valve will open
in a short time and the waste in the
toilet will be flushed into the
waster-water holding tank.
⑥ . Door Seal and Ventilation System: The door of the toilet module has a seal strip, which
prevents any odor from getting into the bus; The toilet module is equipped with a fan (a dual fan with
inner and outer two different uses, the fan will be operated in a low speed to vent the air constantly,
when the toilet is vacant, however, it will be operated in high speed for ventilation, when the toilet is
occupied. The outer fan operates in a normal speed), keeping Fresh air in the bus with automatically
ventilation.
⑦
. Handles: For the safety and convenience of the
passengers, the toilet module has installed safety
handles inside or also outside of the toilet module.
⑧
. The dashboard indication: in the signal area of dashboard, it can indicate in time: vacant or
occupied, the water state of fresh-water and waste-water holding tank, and emergency (Alarm button
is installed in toilet) and so on, which makes drivers know the usage status of the toilet.
Faucet Soap dispenser
Flush button
Toilet cover
Internal
handle
Hand-wash
button