Perks
®
1
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Care.
2460952, Revision -
Assembly Instructions
Wire Manager
Tools Required
Hardware Required
•
Cordless Drill
•
#2 Philips Head Bit
1. Attach hanger with #8 X 1” flathead screw to underside of
surface in desired location (Figure A).
2. Run wires thru base of manager before attaching to under-
surface hanger (Figure B).
Installation
•
#8 x 1” Flathead Flakeboard Screws
•
Worksurface attachment hanger
Figure A
Figure B
Hanger
