Assembly Instructions
Perks
™
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Service.
Part No. 2066764
Revision A-08
Page 3 of 4
VESA Bracket to Monitor Installation
12. Select 75mm or 100mm VESA Bracket to match hole pattern
on back of monitor.
13. Place VESA Bracket in position on back of monitor with
cut-out toward top of monitor and attach using screws
provided. For this you may also use screws that came with
your monitor. (Figure H).
Important:
Monitor should not exceed 20 lbs.
Monitor to Mounting Arm Installation
14. Place cut-out on VESA Bracket over Lip at end of Arm.
Secure monitor to arm using two (2) screws. (Figure I).
Cable Management
15. Route the monitor and power cables through clips as shown.
The clip for the pole must be opened and slipped over the
pole and then secured with the supplied screw to the desired
height as indicated. (Figure J).
VESA Bracket
Cut-out
Tighten Screws
Figure H
Figure I
Figure J
Clips
