Assembly Instructions
Perks
™
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Service.
Part No. 2040777
Revision A-08
Page 2 of 2
Installation (continued)
2. Position wall mount bracket on the wall at desired location.
At least two studs must be used for support with wood or
metal stud mounting. (Figure B). Ensure bracket is level.
Drill pilot holes required for fasteners thru bracket
1
⁄
2
" from
bottom edge of bracket. For wood or metal stud mount,
use one fastener at each stud. (Figure B).
For concrete or block wall mount, it is recommended a
fastener be placed 2" from each end and in the center.
(Figure C).
3. Attach the pencil tray to the front of the board using the
four 1
1
⁄
2
" screws
provided. (Figure D).
4. Hold the board securely and slip the lower edge of the
mounting bracket over and behind the upward protruding
lip of the wallmount bracket. Then slide the board down to
lock it into position. (Figure E).
Figure C
Figure D
Figure B
Figure E
Pilot
Hole
Level
line
At least 2 studs
must be used
Front surface of
Markerboard
Level
line
Pilot
Hole
2" from
end
1
⁄
2
" from
bottom edge
of bracket
Level
line
Level
line
1
⁄
2
" from
bottom edge
of bracket
Pilot
Hole
Pilot
Hole
2" from
end
Pencil Tray used on
Markerboard only
Mounting
Bracket
Slide down
to lock into
position
Wall Mount
Bracket
Pilot
Hole
P
ri
n
te
d
in
U
.S
.A
.
©
2
0
0
8
K
im
b
a
ll
In
te
rn
a
ti
o
n
a
l,
In
c
.
T
8
0
0
.4
8
2
.1
8
1
8
F
8
1
2
.4
8
2
.8
3
0
0
