Assembly Instructions
Perks
™
Printed in U.S.A.
© 2007 Kimball Inter
national, Inc.
T 800.482.1818
F 812.482.8300
Page 1 of 1
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Care.
Part No. 2040778 Revision A-07
Work Tools Bumper Placement
Tools Required
I
None
Package Contents
I
Peel-off Bumpers
Installation
Note:
The rubber bumpers are intended for use on Work Tools
when they are hung on Xsite® TRAXX®, Traxx or slat tile.
1. Peel the rubber bumpers from their adhesive backing and
firmly affix them to the rear of the work tool. If the work
tool is to be placed on a worksurface, affix a bumper near
each corner of the bottom of the work tool. (Figure A).
2. When the work tool is being hung on Xsite Traxx, Traxx or
slat tile the rubber bumpers should be located within
3
⁄
8
"
of the bottom of the work tool hanging flange. Space the
rubber bumpers evenly across the width of the work tool.
(Figure B).
Figure A
Figure B
Or, Affix to Bottom
Within
3
⁄
8
"
Affix to Rear
Space evenly across
rear of work tool
