Assembly Instructions
Perks
™
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Service.
Part No. 2040775 Revision A-07
Page 1 of 1
Center Drawer
Tools Required
I
Drill
I
Tape Measure or Ruler
I
Phillips Head Bit
I
Pencil
Package Contents
I
Center drawer with
I
4 Screws
two slides
Installation
1. Locate center drawer by setting back
1
⁄
4
" from front edge
of worksurface at the desired location. (Figure A).
2. Hold center drawer in place and mark the locations for the
slide screws on the underside of the worksurface.
3. Attach drawer in marked locations using screws provided.
Note:
Center drawer cannot be used under a 24"D
worksurface when using a modesty panel.
Figure A
Set back
1
⁄
4
"
from front of
worksurface
Center line
of drawer
Printed in U.S.A.
© 2007 Kimball Inter
national, Inc.
T 800.482.1818
F 812.482.8300
Center line
of drawer
