Kikusui TOS3200, Руководство пользователя, Страница: 120 / 130

120
TOS3200
B
System Settings
The system settings consist of the following five screens.
You can enter the system setup screen from the 1/2 screen of each operation mode.
To exit from the system setup screen, press the MANUAL or AUTO key to return to the
screen of the original operation mode.
Setup Items of SYSTEM1/5
Press the SYSTEM key to display SYSTEM1/5.
On SYSTEM1/5, set the items indicated in the following.
SYSTEM1/5 General settings of the TOS3200
SYSTEM2/5 Measurement check
SYSTEM3/5 Management of the single test result data
SYSTEM4/5 Management of the program test result data
SYSTEM5/5 Time settings and calibration management
SYSTEM
MANUAL
I / F EDIT
AUTO
MEAS PASS CONV
MEAS MODE :NORM BUZ VOL (PASS) : 3
PASS HOLD : 2.0s BUZ VOL (FAIL) : 3
CONV :OFF CONTRAST : 5
SELV :OFF LINE BRK(AUTO) :ON
SELV <NEXT>
SYSTEM1 / 5
1
2
3
4
5
6
7
8
9
Item Description Panel operation
1
MEAS MODE Sets whether to hold the maximum value of the measured values. F1 key
NORM Normal measurement (not hold the maximum value)
Rotary knob
MAX
Hold the maximum value.
Displays the maximum value during the measurement
period.
2
PASS HOLD Sets the time to hold the PASS judgment. F2 key
Time Selectable range: 0.2 s to 10.0 s
Rotary knob
HOLD Hold until the STOP switch is pressed.
3
CONV
Displays the converted measured current based on the specified line
voltage.
Available in the TC measurement or PCC Measurement Mode.
F3 key
Voltage Selectable range: 80.0 V to 300.0 V
Rotary knob
OFF Disable the conversion display.